The Gooee Bluetooth Mesh Access Point (MAP) allows a wired extension of an existing installation. This allows either the total number of managed nodes to be increased or the physical extension of the system over different areas or floors.  It provides a direct link between the local Bluetooth network and the Enterprise gateway.

It is primarily designed to communicate with luminaires and other connected devices / controls using Bluetooth Mesh. A wired connection supporting power over ethernet is provided to allow communication to the Enterprise gateway.


Secure communication to the Gooee Cloud via a Gooee Enterprise Gateway
Secure communications between the Gateway, WIMs and other wireless-based devices

Supports up to 150 Gooee WIMs on the local Bluetooth Mesh network (directly)


Wired interface including power over ethernet via the local network for connection to the Enterprise Gateway and then the Cloud.

Support for Bluetooth Smart Mesh

Supports over-the-air updates including managed updates to WIMs / Sensors


Physical Characteristics

  • Dimensions: Diameter 155 x 38mm
  • Screw Mounting (Surface mounting adapter provided)
  • Weight: 0.2kg

Environmental Requirements

  • Intended for indoor use only
  • IP Rating: IP20
  • Ambient temperature: -20 to 50 deg C
  • Minimum clearance around the installed MAP: 50mm

Electrical Supply

  • Supply Voltage: 48V DC (over POE)
  • Auxiliary Voltage: 12V DC (Auxiliary supply socket in situations where POE is not preferred
  • Power Requirements: Maximum 2W

Physical Interfaces   (Wired)

  • Ethernet (RJ45) – Gigabit with POE
  • 1x Auxiliary Supply Jack
  • 1x Micro USB (Debug)
  • Reset Switch
  • Power Status LED

Wireless Interfaces

  • Bluetooth Mesh Network (up to 150 nodes dependent on service profile)

Hardware overview

  • 696 MHz Cortex A7 ARM CPU
  • 512MB DDR3 RAM
  • 4GB MLC eMMC flash storage
  • microSD card socket