The eye of Gooee’s platform is our unique sensor platform. It is designed to capture environmental data and human activity, along with monitoring the luminaires performance.

Facing downwards – the sensor has the capability of detecting motion, direction, ambient light levels and operating temperature.

Upwards – the sensor monitors light intensity and colour quality for predictive maintenance benefits.

Our sensor board is designed for discrete integration into a variety of luminaires providing a convergence of technology infrastructure within buildings, using lighting-as-a-host. Functionality includes: absence and presence detection as well as ambient light sensing (ALS) for daylight harvesting. This replaces the need for additional PIRs and ALS sensors. 

We also provide a housed version of the sensor board in a surface mounted case. This retrofit solution is achievable with a direct wired connection to our WIM. Lighting partners develop customs clips to attach to the side of luminaires such as downlights and panels.

Note: Image is for representational purposes and may vary depending on model variant


  • Built-in edge processing – no images transferred outside of the device (GSC1)
  • Absence and presence motion detection (under normal ambient light conditions – GSC1)
  • Ambient light measurement (GSC1)
  • Light level relative to an initial measured value (GSC2) – Available 2H19
  • Light relative colourpoint RGB (GSC2) Available 2H19
  • Motion detection (no/ low light levels – PIR)
  • Supports OTA firmware updates (for later introduction of additional functionality)


Physical Characteristics

  • Dimensions: 26.5 x 12 x 7mm

Detection Capabilities

  • GSC1 Optic – 65° FOV (Example coverage @ 3m height = 3.8m x 3.8m [14.4m­²])
  • PIR Fresnel – 85° FOV (Example coverage @ 3m height = 5m x 5m [25m²])*
    *Specification subject to modification. Please enquire

Environmental Requirements

  • Intended for indoor use only (IP20)
  • Ambient Temperature 0 to 70°C

Application Requirements

  • Upper window (GSC2) to be placed in-line with light output or able to read light spill

Electrical Supply

  • DC Supply voltage: 3.3V
  • DC Supply current: 16.5mA (GSC1 + GSC2 variant)


  • Integrated sensor ASICs with the processor, signal amplification and conversion on a single board with connectors

Interfaces Physical (Wired)

  • Connection to WIM via 4 pole connector
  • Molex Pico-Clasp™ 1.00mm (501939-0400)



Part Ref.



Sensor module – GSC1 Assy


Sensor module – GSC1 + PIR Assy


Sensor module – GSC1 + GSC2 Assy

*Available 1Q19