The Gooee WIM is a modular control device based on the Gooee Core it provides switching, power monitoring and communications services for a luminaire and / or sensors.

The modular design separates power, communications and control boards allowing support for a variety of control solutions.


The Wireless Interface Module can connect to a wireless network for control via either a Gooee Core (Bluetooth Mesh), IEEE 802.15.4 (Zigbee or Thread) or WiFi depending on the communication module chosen.

The WIM can be configured to provide control output for both analog systems (1-10V, 0-10V & PWM) and digital systems (DALI). In addition, WIMs provide an interface for the Gooee NSense modules (environment & light quality dual ASIC sensor).


 Fully compatible with Gooee Cloud platform and services.

Modular design allowing a WIM to be customized for the specific interfaces needed for each customer site and specific application.

Power module providing

  • Switching and power monitoring for in line connected luminaires
  • Electromechanical switching disconnecting luminaires / drivers
  • Live Power monitoring providing real-time Apparent and Real Power (W), Voltage (V) & Current (A)

Communication modules supporting

  • Gooee Core GC2.0 (Bluetooth Mesh)
  • IEEE 802.15.4 (Zigbee or Thread)
  • WiFi
  • Gooee environment sensor interface on all versions

Controls modules supporting

  • DALI

  • Analog Output (1-10V, 0-10V, PWM)

The WIM supports over-the-air updates.


Physical Characteristics

  • Dimensions: 150 x 55 x 30mm

  • Mounting: Slots 6 x 4.2mm on 128 x 30mm centres.

  • Weight: <0.2kg

Environmental Requirements

  • Intended for indoor use only!

  • IP Rating: IP20

  • Ambient Temperature -20 to +50 ºC

  • Tcase : TBC

  • Relative humidity : 10 to 90 % Non-condensing

Electrical Supply

  • Nominal Supply Voltage : 110-240V

  • Supply Voltage: 90-264V AC

  • Supply frequency: 50/60Hz

  • Inrush current  TBC

  • Power Requirements:

  • Maximum : 3.5W
  • Relay Off  
  • Power module only: 220V, 9.2mA, 0.46W
  • Power module + BLE: 220V, 10.5mA, 0.72W
  • Power module + BLE + Sensor: 220V, 11.8mA, 0.87W
  • Power module + BLE + Sensor + Analog control: 220V, 12mA, 0.92W
  • Power module + BLE + Sensor + DMX512: 220V, 12.2mA, 0.94W
  • Power module + BLE + Sensor + DALI: 220V, 12.4mA, 0.96W
  • Relay On
  • Power module only: 220V, 55mA, 3.3W with drivers
  • Power module + BLE: 220V, 55~60mA, 3.3~3.5W with drivers
  • Power factor (without loading): 0.5

  • Power factor (loaded with fixture PF>0.9): ~0.9

  • Maximum Load: 4A

Physical Interfaces   (Wired)

  • Power Mains (switched pass through) relay life >30k switching cycles.
  • Maximum wire size (power): 1.5mm2
  • Strain relief (mains side) 3.5 – 14mm (x2)
  • Controls DALI (optional control module) 2 pole screwless terminal block
  • 0-10V, 1-10V or PWM (optional control module) 4 pole screwless terminal block
  • Maximum wire size (control): 0.13 – 1.5mm2
  • Strain relief (control side) 3.5 – 10mm (x2)

Gooee environment sensor to support flexible interface and connectors

  • LED indicator lights for sensor and Mesh connection.

Wireless Interfaces   (Communications Module)

  • Bluetooth Mesh Network
  • Zigbee HA1.2 or Thread
  • WiFi

Storage temperature and humidity

  • Ambient temperature : -25 to +85 ºC
  • Relative humidity : 5 to 95 % (non-condensing)


  • WIM Lifetime  : 50,000 Hours 
  • Relay Switching Cycles : 30,000 minimum  

Certificates and standards

  • Approval marks ENEC / CE